How to purify tank water?

To purify tank water, test it first, clean the roof, gutters and tank, fit a first-flush diverter, then run the water through a sediment filter, a carbon filter and a UV steriliser. Add reverse osmosis at the kitchen tap if the test shows salt, lead or high dissolved solids. This treatment train is the standard for safe tank water in Australia.
Why Tank Water Needs Purifying in Australia
Rainwater looks clean, but the roof collects bird droppings, leaves, dust, possum waste, bushfire ash and spray drift. A tank has no chlorine like town supply, so germs can grow in sludge at the bottom. Families, new home buyers, rural residents and apartment owners who rely on a tank as a main supply need a clear plan, not guesswork. A good water filtration system protects drinking, cooking, showering and appliances.
What Is in Your Tank Water?
Tank water can hold a mix of germs, grit and chemicals. The mix changes with the roof, the trees around the house, local traffic and farm activity. A lab test gives a clear picture before you spend money on gear.
Contaminant | Main source | Risk | Removed by |
E. coli and bacteria | Bird and animal droppings | Stomach illness | UV light, boiling |
Sediment and silt | Roof, gutters, tank sludge | Cloudy water, blocked filters | Sediment filter |
Leaves and debris | Trees, gutters | Taste, odour, germ growth | Screens, first-flush diverter |
PFAS, pesticides, herbicides | Spray drift, roof runoff | Chemical load | Carbon filter |
Iron, rust and metals | Bore water, old pipes, roof | Stains, taste, scale | Iron filter, carbon, reverse osmosis |
Taste and odour | Algae, organic matter | Poor taste | Carbon filter |
How to Purify Tank Water Step by Step
Step 1: Test the water
Get a NATA-accredited lab test for E. coli and basic chemistry, plus pH, iron, hardness and salt. WA bore water filters need a different set-up to rainwater, as bore water often has high iron, manganese and salt. Fix iron and hardness before UV, or the lamp will not work well.
Step 2: Clean the catchment
Clear gutters, trim overhanging branches and check the roof for rust or damaged flashing. Fit 1 mm stainless mesh on the inlet, overflow and outlet. Keep the tank lid sealed and dark inside, as light helps algae grow.
Step 3: Fit a first-flush diverter
This device sends the first dirty runoff to waste after a dry spell. It stops most leaves, droppings and dust from reaching the tank. Clean it every three months.
Step 4: Filter, then sterilise
Use this order: sediment filter first, carbon filter second, UV last. Sediment protects the other stages. Carbon improves taste and cuts chemicals. UV kills bacteria and viruses with no chemicals added, which makes it a strong choice for eco-friendly water filtration.
Step 5: Protect the drinking tap
For extra safety at one tap, add under-sink filtration systems with reverse osmosis. This is useful in apartments and small homes where a full whole-home set-up is not practical.
Best Water Filtration Systems for Tank Water
Sediment filtration
A 5-micron sediment cartridge removes silt, dirt and rust. It is the first stage in most tank systems and keeps flow strong.
Carbon filtration
A 0.5-micron carbon block cuts taste, odour, chlorine by-products, pesticides and some PFAS. It also helps with colour from tannins.
UV sterilisation
UV light kills bacteria and viruses by damaging their DNA. It needs clear water to work, so it must sit after sediment and carbon. Change the lamp every 12 months.
Reverse osmosis
Reverse osmosis removes dissolved salts, lead, arsenic and other solids. Use it for drinking water only, as it wastes some water and strips minerals.

Insight: Australian research covering 25 years of tank testing found E. coli above the drinking water guideline in 49% of rainwater tank samples. Clear water can still carry germs, so a steriliser stage matters even if taste and colour look fine.
Whole-Home Water Filters vs Under-Sink Filtration Systems
Whole-home water filters treat water at the entry point, so every tap, shower and appliance gets filtered water. Under-sink systems treat water at one tap, often to a higher level. Many Australian homes use both: whole-home for protection, under-sink reverse osmosis for drinking.
System | Typical cost in Australia | Protects | Best for | Cartridge change |
Whole-home sediment + carbon + UV | $1,800 - $3,500 | All taps in the house | Families, rural homes, farms | 6-12 months, UV lamp 12 months |
Under-sink reverse osmosis | $550 - $900 | Drinking tap only | Apartments, town homes | 6-12 months |
Under-sink carbon + UV | $700 - $1,400 | Drinking tap only | New home buyers, small homes | 6-12 months |
A local water filtration service can test, install and service the system, and set a reminder for cartridge changes. In WA, ask for a service plan that covers bore and rainwater tanks.
Tank Water Care: A Simple Schedule for Australian Homes
Keep a simple routine. Clean the first-flush device every three months and clean gutters and screens every six months. Check inside the tank every two to three years for sludge and clean it out if the layer is thick. Replace sediment and carbon cartridges every 6 to 12 months and the UV lamp every 12 months. Book a pro clean if you see dead animals, brown water, bad smell or blocked filters.
FAQs About How to Purify Tank Water:
Is tank water safe to drink in Australia?
Yes, if the system is well kept and treated. Clear water from a clean roof and tank is low risk for most people, but it can still carry bacteria from bird droppings. Use sediment, carbon and UV filtration, and boil water if you are unsure. Babies and older people should take extra care.
How often should I clean my rainwater tank?
Check gutters, screens and first-flush devices every three to six months. Inspect inside the tank every two to three years and remove sludge if it covers the floor. Clean sooner if water smells, tastes bad, turns brown, or filters block often. A low tank level is the best time for a full clean.
Can I drink tank water without a filter?
You can, but it is not the safest choice. Unfiltered tank water may look clear yet still hold bacteria, parasites and fine sediment. A sediment and carbon filter plus UV gives far better protection for drinking and cooking. If you have no filter, boil water for one minute and let it cool before use.
What is the best filter for tank water?
A three-stage set-up works best for most Australian homes: a 5-micron sediment filter, a carbon block for taste and chemicals, and UV light to kill germs. Add reverse osmosis at the kitchen tap if your test shows salt, lead or high dissolved solids. Test first, then match the system to the result.
Do I need UV light for tank water?
Yes, for drinking water. Filters remove dirt and improve taste, but they do not kill all germs. UV light kills bacteria and viruses without chemicals and protects every tap if fitted as a whole-home system. Change the lamp every 12 months, as its power fades even if it still glows.
.png)


